install b/o plate, no brakes

decentZ89 · 01-03-2012, 07:19 AM

i just installed my lsr block off plate and im gonna sound like a complete newb but i just winged the install and now my rear brakes dont work lol..i checked the reservoir and its still full (the rear obv) and im kind of at a loss here.. anyone have any suggestions?

TRMN8TR · 01-03-2012, 07:57 AM

Use the front brakes?

beaverclever02 · 01-03-2012, 08:22 AM

Im not sure what you could have done. It's only like two bolts

TuckerHardRide · 01-03-2012, 12:24 PM

Did you have brakes before?

Hughesc99 · 01-03-2012, 12:24 PM

Maybe disconnected something you shouldnt have?Look over everything for your rear brakes and the pedal area real well. I just woke up so Im out of ideas Lol.

decentZ89 · 01-03-2012, 03:19 PM

Lol maybe I disconnected the wrong piece. That sounds really dumb but can someone take a quick picture of their rear brake with the block off plate installed? I'd appreciate it

TuckerHardRide · 01-03-2012, 03:32 PM

I have one in my quad of the month thread, click on the link in my sig.

xtremkfx · 01-03-2012, 06:28 PM

I just put a block=off on my KFX the other day and my brakes work fine....was curious because it didn't come with an o-ring but I don't think you need it. noticed when I bought mine some come with o-rings. I really don't think the plate will bolt anywhere else.

decentZ89 · 01-03-2012, 08:27 PM

ok i did put it on right..at least it matches tuckers lol...im confused. they did work fine before i put the plate on

TuckerHardRide · 01-03-2012, 08:52 PM

Quote:

Originally Posted by decentZ89

ok i did put it on right..at least it matches tuckers lol...im confused. they did work fine before i put the plate on

Are you 100% positive?

decentZ89 · 01-03-2012, 09:10 PM

almost 100% ill take some pics of it tmrw

TuckerHardRide · 01-03-2012, 09:55 PM

Please do, did you bleed it? Did you open anything up? Is the piston out against the pad?

decentZ89 · 01-03-2012, 10:03 PM

Quote:

Originally Posted by TuckerHardRide

Please do, did you bleed it? Did you open anything up? Is the piston out against the pad?

no i didnt bleed it..i did buy brand new brake pads (on sale sintered pads from rocky mountain 10 bucks!) but i just got them bc they were on sale..not sure if i NEEDED them but my brakes did work fine prior to the plate so im thinking i disturbed something

atv4life95 · 01-03-2012, 10:06 PM

Quote:

Originally Posted by decentZ89

no i didnt bleed it..i did buy brand new brake pads (on sale sintered pads from rocky mountain 10 bucks!) but i just got them bc they were on sale..not sure if i NEEDED them but my brakes did work fine prior to the plate so im thinking i disturbed something

I bought a set of those Neutron brake pads from Rocky Mountain too!

TuckerHardRide · 01-03-2012, 10:25 PM

Did you install them at the same time?

01-03-2012, 07:19 AM	#1 (permalink)
decentZ89 :::LT250 Rider::: Join Date: Nov 2011 Location: New York Posts: 803	install b/o plate, no brakes i just installed my lsr block off plate and im gonna sound like a complete newb but i just winged the install and now my rear brakes dont work lol..i checked the reservoir and its still full (the rear obv) and im kind of at a loss here.. anyone have any suggestions? __________________ 2003 Suzuki Ltz 400 -got some stuff 2000 Honda XR50 - pitbike 2006 Nissan SE-R Spec-v - daily driver 1993 Jeep Wrangler - built and swapped

01-03-2012, 07:57 AM	#2 (permalink)
TRMN8TR :::Z-250 Rider::: Join Date: Nov 2011 Location: Location: Location: Posts: 402	Use the front brakes? __________________ 2006 z400. It has things and stuff.

01-03-2012, 08:22 AM	#3 (permalink)
beaverclever02 :::LT500 Rider::: Join Date: Feb 2011 Location: Holt, Mo Posts: 1,736	Im not sure what you could have done. It's only like two bolts __________________ 03 Z400, Fly Aluma Steel Bars, Blob removed, fly kill switch, ASV levers, Power Madd hand gaurds, MQ park brake block, DG O-series pipe with Curtis sparks header, Pro Armor full nerfs with heel gaurd, CST Ambush Front and Rears, GBC Sand shark and shark fins on douglas blue label, No lid,pro design air filter, no snorkel, 6000k HID conversion, procom cdi, 06 ressie shocks, FCR39 tuned.

01-03-2012, 12:24 PM	#4 (permalink)
TuckerHardRide :::Official Spammer::: Join Date: Feb 2008 Location: PA Posts: 3,221	Did you have brakes before? __________________ 2006 LTR450 Engine Mods: Yoshimira Cherry Bomb - RS-5 Full Exhaust - Inspection Plug Choke B/O Nut - Start Button JE Piston Suspension, Steering & Chassis: Flexx Bars w Turner Clamps - Precision Damper - Tag Skid Plate Powermadds - LT Fox Evol w FuelATV A-Arms - Fox Podium Rear Pro Armor Grab Bar - IMS Roll Nerf + Heel + Bumper Misc: DID X-Ring Chain - Sprocket Guard - Frame Guards - ProDesign K/S Hiper Tec 3 - ITP Beadlock Rear Rims Parted Out: 2004 LTZ400 - September 2011 QOTM

01-03-2012, 12:24 PM	#5 (permalink)
Hughesc99 :::Post Whore::: Join Date: Aug 2010 Location: Derby, KS Posts: 2,093	Maybe disconnected something you shouldnt have?Look over everything for your rear brakes and the pedal area real well. I just woke up so Im out of ideas Lol. __________________ 2006 Lt-Z434 Trinity IV Full Exhaust/OSHC/FCR39 w/AP Safety Wired/ Velocity Intake/Odi Rogue Grips/AC Nerfs Factory Suzuki Heel Guards/Durablue Rear Linkage +2+1 A-Arms

01-03-2012, 03:19 PM	#6 (permalink)
decentZ89 :::LT250 Rider::: Join Date: Nov 2011 Location: New York Posts: 803	Lol maybe I disconnected the wrong piece. That sounds really dumb but can someone take a quick picture of their rear brake with the block off plate installed? I'd appreciate it __________________ 2003 Suzuki Ltz 400 -got some stuff 2000 Honda XR50 - pitbike 2006 Nissan SE-R Spec-v - daily driver 1993 Jeep Wrangler - built and swapped

01-03-2012, 03:32 PM	#7 (permalink)
TuckerHardRide :::Official Spammer::: Join Date: Feb 2008 Location: PA Posts: 3,221	I have one in my quad of the month thread, click on the link in my sig. __________________ 2006 LTR450 Engine Mods: Yoshimira Cherry Bomb - RS-5 Full Exhaust - Inspection Plug Choke B/O Nut - Start Button JE Piston Suspension, Steering & Chassis: Flexx Bars w Turner Clamps - Precision Damper - Tag Skid Plate Powermadds - LT Fox Evol w FuelATV A-Arms - Fox Podium Rear Pro Armor Grab Bar - IMS Roll Nerf + Heel + Bumper Misc: DID X-Ring Chain - Sprocket Guard - Frame Guards - ProDesign K/S Hiper Tec 3 - ITP Beadlock Rear Rims Parted Out: 2004 LTZ400 - September 2011 QOTM

01-03-2012, 06:28 PM	#8 (permalink)
xtremkfx :::Mini LT50 Rider::: Join Date: May 2011 Location: Pittsburgh PA Posts: 51	I just put a block=off on my KFX the other day and my brakes work fine....was curious because it didn't come with an o-ring but I don't think you need it. noticed when I bought mine some come with o-rings. I really don't think the plate will bolt anywhere else.

01-03-2012, 08:27 PM	#9 (permalink)
decentZ89 :::LT250 Rider::: Join Date: Nov 2011 Location: New York Posts: 803	ok i did put it on right..at least it matches tuckers lol...im confused. they did work fine before i put the plate on __________________ 2003 Suzuki Ltz 400 -got some stuff 2000 Honda XR50 - pitbike 2006 Nissan SE-R Spec-v - daily driver 1993 Jeep Wrangler - built and swapped

01-03-2012, 09:10 PM	#11 (permalink)
decentZ89 :::LT250 Rider::: Join Date: Nov 2011 Location: New York Posts: 803	almost 100% ill take some pics of it tmrw __________________ 2003 Suzuki Ltz 400 -got some stuff 2000 Honda XR50 - pitbike 2006 Nissan SE-R Spec-v - daily driver 1993 Jeep Wrangler - built and swapped

01-03-2012, 09:55 PM	#12 (permalink)
TuckerHardRide :::Official Spammer::: Join Date: Feb 2008 Location: PA Posts: 3,221	Please do, did you bleed it? Did you open anything up? Is the piston out against the pad? __________________ 2006 LTR450 Engine Mods: Yoshimira Cherry Bomb - RS-5 Full Exhaust - Inspection Plug Choke B/O Nut - Start Button JE Piston Suspension, Steering & Chassis: Flexx Bars w Turner Clamps - Precision Damper - Tag Skid Plate Powermadds - LT Fox Evol w FuelATV A-Arms - Fox Podium Rear Pro Armor Grab Bar - IMS Roll Nerf + Heel + Bumper Misc: DID X-Ring Chain - Sprocket Guard - Frame Guards - ProDesign K/S Hiper Tec 3 - ITP Beadlock Rear Rims Parted Out: 2004 LTZ400 - September 2011 QOTM

01-03-2012, 10:25 PM	#15 (permalink)
TuckerHardRide :::Official Spammer::: Join Date: Feb 2008 Location: PA Posts: 3,221	Did you install them at the same time? __________________ 2006 LTR450 Engine Mods: Yoshimira Cherry Bomb - RS-5 Full Exhaust - Inspection Plug Choke B/O Nut - Start Button JE Piston Suspension, Steering & Chassis: Flexx Bars w Turner Clamps - Precision Damper - Tag Skid Plate Powermadds - LT Fox Evol w FuelATV A-Arms - Fox Podium Rear Pro Armor Grab Bar - IMS Roll Nerf + Heel + Bumper Misc: DID X-Ring Chain - Sprocket Guard - Frame Guards - ProDesign K/S Hiper Tec 3 - ITP Beadlock Rear Rims Parted Out: 2004 LTZ400 - September 2011 QOTM

Remove Advertisements Sponsored Links
SuzukiCentral.com Advertisement