Dr D. Reverse Lever with PowerMadd hand guards compatibility problem

polorico · 05-29-2011, 08:00 AM

Like the title says, I'm tryingt o figure out a way to put these together, seems like my reverse lever is having enough space to be installed but not to work. The PowerMadd hand guars are blocking the lever.

Any way to work around it? anybody else had the same problem? If possible to post some pics as well por favor!

biggiej42 · 05-29-2011, 11:14 AM

I haven't had a problem and they fit just fine. How are you installing yours?

woodsrider129 · 05-29-2011, 12:13 PM

Check out this...http://www.suzukicentral.com/forums/...nd-guards.html

Installing any hand guard can be tricky with the limited amount of space Atv bars have, but it's possible.

Mudslinger11 · 05-29-2011, 02:45 PM

polorico · 05-31-2011, 04:45 PM

oh my... you guys are great thanks for the pics, I discovered my hand guards aren't mounted correctly, the brackets are mounted the wrong way. Thanks again!

biggiej42 · 05-31-2011, 06:57 PM

no problem! enjoy!

camaro1976 · 06-01-2011, 01:52 AM

I can't imagine how anyone has powermadds mounted on flexx bars... Unless you get the brackets that extend to the rotation pins. If you bought the motocross bars it would help a ton though. With my atv bend I have just enough room on the left for the dirtbike kill, clutch lever, and tether slightly hanging over the wider lip. On the right side i can barely cram on the throttle and brake

woodsrider129 · 06-01-2011, 05:10 PM

Quote:

Originally Posted by camaro1976

I can't imagine how anyone has powermadds mounted on flexx bars... Unless you get the brackets that extend to the rotation pins. If you bought the motocross bars it would help a ton though. With my atv bend I have just enough room on the left for the dirtbike kill, clutch lever, and tether slightly hanging over the wider lip. On the right side i can barely cram on the throttle and brake

You don't have to wotty about imagining it, lol. You don't need the special brackets for the rotation pins either. I posted pics on the following thread...http://www.suzukicentral.com/forums/...nd-guards.html

The way the Flexx bars are designed does make it really difficult, if not almost impossible, to add the Powermadd handguards without a special bracket. But there is some adjustability in the way that they mount. Of coarse the blob needs to be removed.

91mcnasty · 07-27-2011, 07:34 PM

Do the powermadds from eBay come with the mounting brackets?

biggiej42 · 07-27-2011, 09:52 PM

Quote:

Originally Posted by 91mcnasty

Do the powermadds from eBay come with the mounting brackets?

Ask the seller, they'd know better than we would.

tylerltz400 · 07-27-2011, 11:06 PM

Quote:

Originally Posted by biggiej42

I haven't had a problem and they fit just fine. How are you installing yours?

I put my mounting bracket under the lever

Dangerouspower · 08-01-2011, 05:55 PM

How much does the dr. d reverse lever cost ? Also how much are the power madd hand guards ?

polorico · 08-01-2011, 06:35 PM

I have a red set of power madd hand guards.

Dangerouspower · 08-01-2011, 08:12 PM

How much did you pay for them ?

Pulido221 · 08-01-2011, 08:45 PM

I put my powermadds on yesterday afternoon and there was bearly any room for anything else! I don't know how I'm gona put on my tether kill switch

05-29-2011, 08:00 AM	#1 (permalink)
polorico :::Z-250 Rider::: Join Date: Jun 2010 Location: Quebec, Canada Posts: 474	Dr D. Reverse Lever with PowerMadd hand guards compatibility problem Like the title says, I'm tryingt o figure out a way to put these together, seems like my reverse lever is having enough space to be installed but not to work. The PowerMadd hand guars are blocking the lever. Any way to work around it? anybody else had the same problem? If possible to post some pics as well por favor!

05-29-2011, 11:14 AM	#2 (permalink)
biggiej42 :::Official Spammer::: Join Date: Jun 2006 Posts: 3,394	I haven't had a problem and they fit just fine. How are you installing yours? __________________ 05' Z434 12.5:1CP,Full Yosh TRC,FCR40,175/45,Rat Stack,Dyna Programmable,AMR Coil,KW Valvetrain,536/540 Web's,DID Tchain,PWR Radiator,Raptor petcock,Gunnar Kill,Elka S3 Front+Rear w/link,Roll+1 Stem,GPR Stabilizer,SL Hyd.Clutch,Tag T2,LSR+3 Arms,Burgard+1 Swinger,Quadtech Rad Shrouds,Supersprox 14/40t,UM Air Box,YFZ Calipers,SS Lines,PA Bumper,Asv's,Roll Nerfs/Heels/Pegs,LSR Axcalibar,Douglas G2 Beadlocks/Razr's,Hid,YFZTail,Pwrmadd's,TT Vapor+Dash,CV4's,RickyStator. July 2011 QOTM

05-29-2011, 02:45 PM	#4 (permalink)
Mudslinger11 :::LT500 Rider::: Join Date: Jan 2009 Location: new york Posts: 1,175	__________________ 03'LTZ462,Port/Polish by TTM, KW valves, Drz springs,TT flywheel, HO Stator, PD impeller, NSHC, DMC exaust, FCR39, flex skrew, FCI intake, np dyna, Elka piggyback fronts, pc frame trans blue, pro armor nerfs, dg skids,bumper, frame guards, prm grab bar, maier plastic, one graphics, tusk xc rims, holeshot hd, braided steel brake lines, x-bars, power madd guards, drd's , moose duel gasser, asv levers, fly start button, PD kill with relay, tusk gas cap, raptor petcock, raptor battery, TT vapor

05-31-2011, 06:57 PM	#6 (permalink)
biggiej42 :::Official Spammer::: Join Date: Jun 2006 Posts: 3,394	no problem! enjoy! __________________ 05' Z434 12.5:1CP,Full Yosh TRC,FCR40,175/45,Rat Stack,Dyna Programmable,AMR Coil,KW Valvetrain,536/540 Web's,DID Tchain,PWR Radiator,Raptor petcock,Gunnar Kill,Elka S3 Front+Rear w/link,Roll+1 Stem,GPR Stabilizer,SL Hyd.Clutch,Tag T2,LSR+3 Arms,Burgard+1 Swinger,Quadtech Rad Shrouds,Supersprox 14/40t,UM Air Box,YFZ Calipers,SS Lines,PA Bumper,Asv's,Roll Nerfs/Heels/Pegs,LSR Axcalibar,Douglas G2 Beadlocks/Razr's,Hid,YFZTail,Pwrmadd's,TT Vapor+Dash,CV4's,RickyStator. July 2011 QOTM

06-01-2011, 01:52 AM	#7 (permalink)
camaro1976 :::Get a life! You're over 5000 posts::: Join Date: Feb 2007 Location: NE Wisconsin/ Winona, MN Posts: 9,261	I can't imagine how anyone has powermadds mounted on flexx bars... Unless you get the brackets that extend to the rotation pins. If you bought the motocross bars it would help a ton though. With my atv bend I have just enough room on the left for the dirtbike kill, clutch lever, and tether slightly hanging over the wider lip. On the right side i can barely cram on the throttle and brake __________________ BUICK BROTHER

05-29-2011, 12:13 PM	#3 (permalink)
woodsrider129 :::LT500 Rider::: Join Date: Jul 2010 Location: Owensboro, KY Posts: 1,205	Check out this...http://www.suzukicentral.com/forums/...nd-guards.html Installing any hand guard can be tricky with the limited amount of space Atv bars have, but it's possible.

05-31-2011, 04:45 PM	#5 (permalink)
polorico :::Z-250 Rider::: Join Date: Jun 2010 Location: Quebec, Canada Posts: 474	oh my... you guys are great thanks for the pics, I discovered my hand guards aren't mounted correctly, the brackets are mounted the wrong way. Thanks again!

07-27-2011, 07:34 PM	#9 (permalink)
91mcnasty :::Mini LT80 Rider::: Join Date: Jul 2011 Posts: 202	Do the powermadds from eBay come with the mounting brackets? __________________ 2004 White LTZ 400. Yoshimura Graphics kit. 92mm 12:1 forged JE. Old style hotcams(soon) Kibblewhite valves. Cometic gaskets. Pull choke. 400EX Boot. White/Black Pmadd's. Team Suzuki white shock covers.(soon) Durablue 2-4 inch adjustable axle. LSR brake block-off. HMF Ballance pipe.(looking for header) Nerf Bars. DG Front bumper. Custom Grab Bar. DWT beadlocks w/RAZR's in back. DWT beadlocks w/RAZR knockoffs in front.

08-01-2011, 05:55 PM	#12 (permalink)
Dangerouspower :::KFX 400 Rider::: Join Date: Jul 2011 Location: Pittsburgh, PA Posts: 931	How much does the dr. d reverse lever cost ? Also how much are the power madd hand guards ?

08-01-2011, 06:35 PM	#13 (permalink)
polorico :::Z-250 Rider::: Join Date: Jun 2010 Location: Quebec, Canada Posts: 474	I have a red set of power madd hand guards.

08-01-2011, 08:12 PM	#14 (permalink)
Dangerouspower :::KFX 400 Rider::: Join Date: Jul 2011 Location: Pittsburgh, PA Posts: 931	How much did you pay for them ?

08-01-2011, 08:45 PM	#15 (permalink)
Pulido221 :::Post Whore::: Join Date: Jul 2010 Location: Fresno, Ca Posts: 2,337	I put my powermadds on yesterday afternoon and there was bearly any room for anything else! I don't know how I'm gona put on my tether kill switch __________________ Houser +2 a arms ( tric trac ) ProArmor nerfs,bump,grab bar Renthal Fat Bars ( magrath ) Houser +2 antivibe steer stem Fox Podium X front shocks TCS MX rear shock ASV unbreakable levers Full Curtis Sparks exhaust Dyno jet kit/FCI intake Old style hot cams Int/Ex ITP GNCC tires +2 GForce hubs Quadtech carbon fiber hood Kfx450R Monster graphic kit 450 BBK 13.1 JE piston KB valves / DRZ springs Mild ported head by me " WEAR A DAMN HELMET "

Remove Advertisements Sponsored Links
SuzukiCentral.com Advertisement