Question on Handlebars

D Money Z400 · 06-14-2011, 04:14 PM

Was wondering if anyone could tell me what the difference is between HI mount and Mid mount handlebars? Thinking about getting a pro taper bar for my z but i am fairly new to mods in general. Thanks Dmoney

Salvin36 · 06-14-2011, 04:48 PM

I got the Pro Taper ATV Mid bend and they seem to me like they are right where the stock bars were. The high bend would be slightly taller.

Joshz400_03 · 06-14-2011, 05:01 PM

Best advice is go to a dealer and try them out. I have always liked CR High bend or CR double high. Depends on height and riding style. Some people like the wider dirt bike bars over the skinnier quad bend bars.

zookie400 · 06-14-2011, 06:15 PM

if you have a taller stem i wouldnt go with the hi bars, a stock stem definitely.

'04 LTZ Racer · 07-02-2011, 12:30 AM

I personally prefer the low wide bars but I am stuck with the high bars.

06-14-2011, 04:14 PM	#1 (permalink)
D Money Z400 :::Rookie Rider::: Join Date: Jun 2011 Posts: 3	Question on Handlebars Was wondering if anyone could tell me what the difference is between HI mount and Mid mount handlebars? Thinking about getting a pro taper bar for my z but i am fairly new to mods in general. Thanks Dmoney

06-14-2011, 04:48 PM	#2 (permalink)
Salvin36 :::Ozark 250 rider::: Join Date: Apr 2011 Location: Brush, Colorado Posts: 360	I got the Pro Taper ATV Mid bend and they seem to me like they are right where the stock bars were. The high bend would be slightly taller. __________________ '05 KFX 400 -FCR 39mm TORS/TPS Removed -400ex Intake Tube -Uni 6" Clamp on Filter -HMF Competition Full Exhaust -Alba Pro Elite Black Nerf Bars -13t JT Front Sprocket -ProTaper ATV Mid Bend -Weisco 90mm 12.2-1 Piston -DRZe Base Gasket -Armadillo Swing Arm Skid Plate -GT Thunder Front and Rear Shocks w/ Linkage -AC Racing Front Bumper -X-rex 22" fronts on T-9s Race-Rex 20" Rears -CCP Steering Stabilizer -'09 YFZ450R o.0

06-14-2011, 05:01 PM	#3 (permalink)
Joshz400_03 Super Moderator Join Date: Sep 2003 Location: Green Bay, Wi Posts: 8,300	Best advice is go to a dealer and try them out. I have always liked CR High bend or CR double high. Depends on height and riding style. Some people like the wider dirt bike bars over the skinnier quad bend bars. __________________ KB Motorsports My Mod List 07' LT-R 450 03' Z434 10' SSR DX-3 110 Buick Brother

07-02-2011, 12:30 AM	#5 (permalink)
'04 LTZ Racer :::Ozark 250 rider::: Join Date: Jun 2011 Location: Warren, PA Posts: 285	I personally prefer the low wide bars but I am stuck with the high bars. __________________ 2005 YFZ450 Pro Armor Revolution Nerfs Pro Armor XC Front Bumper Pro Taper Bars Stage 3 Hot Cams Hot Rods Crank Wiseco Piston Maxxis Razr II's Big Thanks To All Of the People Who Have Helped Me Over The Years: Mom And Dad Grandpa And Grandma Tom Carlson At TC Racing Nate McNett At McNett Performance ~In Loving Memory Of Dave Morelli, Thanks Grandpa~

06-14-2011, 06:15 PM	#4 (permalink)
zookie400 :::Post Whore::: Join Date: Aug 2007 Location: Connecticut Posts: 2,683	if you have a taller stem i wouldnt go with the hi bars, a stock stem definitely.

Remove Advertisements Sponsored Links
SuzukiCentral.com Advertisement