trail tech vapor digital guages

trail/trackz400 · 10-03-2011, 10:32 AM

i saw this and i want to get it for my z400 i didnt know if anyone knew anything about it. http://www.trailtech.net/75-2010.html thats the link for it. its a trailtech vapor digital tach, speedometer, temperature guage, and timer. anyone heard of it?

williestyleltz · 10-03-2011, 10:42 AM

Ive got one, Its a good thing to have imo. I think id feel lost without it! Surely worth the money.

Mudslinger11 · 10-03-2011, 11:02 AM

I like mine. I've had it a few years now and still working good.

trail/trackz400 · 10-03-2011, 12:18 PM

Quote:

Originally Posted by williestyleltz

Ive got one, Its a good thing to have imo. I think id feel lost without it! Surely worth the money.

Quote:

Originally Posted by Mudslinger11

I like mine. I've had it a few years now and still working good.

how easy is the install? do i have to at any special sensors?

williestyleltz · 10-03-2011, 01:00 PM

Yea pretty easy. Directions are pretty clear. You will have to cut ur radiator hose for the temp sensor and one wire goes to your coil. You also have to put a sensor on your wheel for your speedo. I would also say get the alum bar mount, looks real neat.

Mudslinger11 · 10-03-2011, 01:01 PM

It's easy, just have to remove your front fenders and follow the directions that they give you. Rather than type out everything, I think you can download the user manual from there site, that way you can see exactly what you have to do. Only thing not on there is what rad hose to cut, I used the upper, it will read a little hotter because it is strait out of the head. I'll post a pic up for you if you need.

williestyleltz · 10-03-2011, 01:01 PM

And the sensors are with it if I can remember right.

Mudslinger11 · 10-03-2011, 01:05 PM

Here's what I did with mine, some like it, some dont. 1000 posts, do I get a cake!!!

williestyleltz · 10-03-2011, 01:15 PM

Mudslinger11, that looks good, I seen the before and after on your original post about the way you were mounting it. Turned out pretty cool.

trail/trackz400 · 10-03-2011, 01:37 PM

Quote:

Originally Posted by Mudslinger11

Here's what I did with mine, some like it, some dont. 1000 posts, do I get a cake!!!

you dont get a cake but u can have some cookies haha looks good ive been reading the install insrtuctions and the magnetic bolt sensor looks kinda complicated.

trail/trackz400 · 10-03-2011, 02:04 PM

where did you mount the speed sensor?

yOGi420™ · 10-03-2011, 02:06 PM

Quote:

Originally Posted by trail/trackz400

you dont get a cake but u can have some cookies haha looks good ive been reading the install insrtuctions and the magnetic bolt sensor looks kinda complicated.

The bolt sensor was pretty easy. I have the endurance model which has the same thing for the speedo and wasn't a big deal at all.

biggiej42 · 10-03-2011, 08:05 PM

Here's mine with their aluminum mount.

Mudslinger... congrats on the 1k post, i'll drink to that

.

kfxguy · 10-03-2011, 10:07 PM

Here's mine

wilsonlaker · 10-03-2011, 10:21 PM

Ebay has them for $90 plus $8 shipping

10-03-2011, 10:32 AM	#1 (permalink)
trail/trackz400 :::LT250 Rider::: Join Date: Oct 2011 Location: roxboro, north carolina however i live on SuzCen Posts: 805	trail tech vapor digital guages i saw this and i want to get it for my z400 i didnt know if anyone knew anything about it. http://www.trailtech.net/75-2010.html thats the link for it. its a trailtech vapor digital tach, speedometer, temperature guage, and timer. anyone heard of it?

10-03-2011, 10:42 AM	#2 (permalink)
williestyleltz :::Rookie Rider::: Join Date: Dec 2010 Location: Fay N.C. Posts: 16	Ive got one, Its a good thing to have imo. I think id feel lost without it! Surely worth the money. __________________ drag/trail 2006 ltz400 90mm cp piston ported head /kw valves/drze springs monster coil full yoshi rs-3 fcr39 with pro flow k&n no lid 13/40 gearing dyna cdi tt vapor protaper bars 21x10x8 8 paddle haulers nx direct port WET shot 20hp 5 ft wheelie bar! cr9e plug 4 sec trail quad

10-03-2011, 11:02 AM	#3 (permalink)
Mudslinger11 :::LT500 Rider::: Join Date: Jan 2009 Location: new york Posts: 1,175	I like mine. I've had it a few years now and still working good. __________________ 03'LTZ462,Port/Polish by TTM, KW valves, Drz springs,TT flywheel, HO Stator, PD impeller, NSHC, DMC exaust, FCR39, flex skrew, FCI intake, np dyna, Elka piggyback fronts, pc frame trans blue, pro armor nerfs, dg skids,bumper, frame guards, prm grab bar, maier plastic, one graphics, tusk xc rims, holeshot hd, braided steel brake lines, x-bars, power madd guards, drd's , moose duel gasser, asv levers, fly start button, PD kill with relay, tusk gas cap, raptor petcock, raptor battery, TT vapor

10-03-2011, 01:00 PM	#5 (permalink)
williestyleltz :::Rookie Rider::: Join Date: Dec 2010 Location: Fay N.C. Posts: 16	Yea pretty easy. Directions are pretty clear. You will have to cut ur radiator hose for the temp sensor and one wire goes to your coil. You also have to put a sensor on your wheel for your speedo. I would also say get the alum bar mount, looks real neat. __________________ drag/trail 2006 ltz400 90mm cp piston ported head /kw valves/drze springs monster coil full yoshi rs-3 fcr39 with pro flow k&n no lid 13/40 gearing dyna cdi tt vapor protaper bars 21x10x8 8 paddle haulers nx direct port WET shot 20hp 5 ft wheelie bar! cr9e plug 4 sec trail quad

10-03-2011, 01:01 PM	#6 (permalink)
Mudslinger11 :::LT500 Rider::: Join Date: Jan 2009 Location: new york Posts: 1,175	It's easy, just have to remove your front fenders and follow the directions that they give you. Rather than type out everything, I think you can download the user manual from there site, that way you can see exactly what you have to do. Only thing not on there is what rad hose to cut, I used the upper, it will read a little hotter because it is strait out of the head. I'll post a pic up for you if you need. __________________ 03'LTZ462,Port/Polish by TTM, KW valves, Drz springs,TT flywheel, HO Stator, PD impeller, NSHC, DMC exaust, FCR39, flex skrew, FCI intake, np dyna, Elka piggyback fronts, pc frame trans blue, pro armor nerfs, dg skids,bumper, frame guards, prm grab bar, maier plastic, one graphics, tusk xc rims, holeshot hd, braided steel brake lines, x-bars, power madd guards, drd's , moose duel gasser, asv levers, fly start button, PD kill with relay, tusk gas cap, raptor petcock, raptor battery, TT vapor

10-03-2011, 01:01 PM	#7 (permalink)
williestyleltz :::Rookie Rider::: Join Date: Dec 2010 Location: Fay N.C. Posts: 16	And the sensors are with it if I can remember right. __________________ drag/trail 2006 ltz400 90mm cp piston ported head /kw valves/drze springs monster coil full yoshi rs-3 fcr39 with pro flow k&n no lid 13/40 gearing dyna cdi tt vapor protaper bars 21x10x8 8 paddle haulers nx direct port WET shot 20hp 5 ft wheelie bar! cr9e plug 4 sec trail quad

10-03-2011, 01:05 PM	#8 (permalink)
Mudslinger11 :::LT500 Rider::: Join Date: Jan 2009 Location: new york Posts: 1,175	Here's what I did with mine, some like it, some dont. 1000 posts, do I get a cake!!! __________________ 03'LTZ462,Port/Polish by TTM, KW valves, Drz springs,TT flywheel, HO Stator, PD impeller, NSHC, DMC exaust, FCR39, flex skrew, FCI intake, np dyna, Elka piggyback fronts, pc frame trans blue, pro armor nerfs, dg skids,bumper, frame guards, prm grab bar, maier plastic, one graphics, tusk xc rims, holeshot hd, braided steel brake lines, x-bars, power madd guards, drd's , moose duel gasser, asv levers, fly start button, PD kill with relay, tusk gas cap, raptor petcock, raptor battery, TT vapor

10-03-2011, 01:15 PM	#9 (permalink)
williestyleltz :::Rookie Rider::: Join Date: Dec 2010 Location: Fay N.C. Posts: 16	Mudslinger11, that looks good, I seen the before and after on your original post about the way you were mounting it. Turned out pretty cool. __________________ drag/trail 2006 ltz400 90mm cp piston ported head /kw valves/drze springs monster coil full yoshi rs-3 fcr39 with pro flow k&n no lid 13/40 gearing dyna cdi tt vapor protaper bars 21x10x8 8 paddle haulers nx direct port WET shot 20hp 5 ft wheelie bar! cr9e plug 4 sec trail quad

10-03-2011, 02:04 PM	#11 (permalink)
trail/trackz400 :::LT250 Rider::: Join Date: Oct 2011 Location: roxboro, north carolina however i live on SuzCen Posts: 805	where did you mount the speed sensor? __________________ 04 z400, fmf powerbomb header, asv unbreakable clutch lever with hot start, lrd 4 series slip on, ITP holeshots, jetted with high rev. limiter computer, pro armor engine skid, 06 shocks, random front bumper, random nerfs, 06 rear shock, SPIZE DASH! Its actualy a 440 but sshhh its a sleeper. WTB: fcr 39,twist throttle, +2 a arms, +1 rear swinger, +1 rear axle, 4:1 front rims with matching style rear rims. I LIVE ON SUZUKICENTRAL!!

10-03-2011, 08:05 PM	#13 (permalink)
biggiej42 :::Official Spammer::: Join Date: Jun 2006 Posts: 3,399	Here's mine with their aluminum mount. Mudslinger... congrats on the 1k post, i'll drink to that . __________________ 05' Z434 12.5:1CP,Full Yosh TRC,FCR40,175/45,Rat Stack,Dyna Programmable,AMR Coil,KW Valvetrain,536/540 Web's,DID Tchain,PWR Radiator,Raptor petcock,Gunnar Kill,Elka S3 Front+Rear w/link,Roll+1 Stem,GPR Stabilizer,SL Hyd.Clutch,Tag T2,LSR+3 Arms,Burgard+1 Swinger,Quadtech Rad Shrouds,Supersprox 14/40t,UM Air Box,YFZ Calipers,SS Lines,PA Bumper,Asv's,Roll Nerfs/Heels/Pegs,LSR Axcalibar,Douglas G2 Beadlocks/Razr's,Hid,YFZTail,Pwrmadd's,TT Vapor+Dash,CV4's,RickyStator. July 2011 QOTM

10-03-2011, 10:07 PM	#14 (permalink)
kfxguy :::Get a life! You're over 5000 posts::: Join Date: May 2007 Location: Louisiana baton rouge Posts: 5,952	Here's mine __________________ OCTOBER 2009 QOTM KFX470 (The Black beast) -web cams custom grinds, titanium valves,cv4 springs -dyna programmable -4" extended swinger, rad aluminum axle -ported head (by me)(please do not pm me about head porting. Thx) -cp 94mm stroker piston, hot rods +5mm stroker -44mm straight bored fcr carb, Fci intake -powder coated everything

10-03-2011, 10:21 PM	#15 (permalink)
wilsonlaker :::Mini LT50 Rider::: Join Date: Nov 2010 Location: western new york Posts: 56	Ebay has them for $90 plus $8 shipping

Remove Advertisements Sponsored Links
SuzukiCentral.com Advertisement