how many link chain?

parker05_05 · 09-02-2011, 07:14 PM

With 14/40 gearing and extended swing arm 3" how many link chain should I need? Anyone have an idea? Thanks.

Grath · 09-02-2011, 11:45 PM

Well I have stock swing with 14/4O, I use nine6 links. me keboad wont function at the moment lol missing lettes

atv4life95 · 09-03-2011, 12:03 AM

14/40 is stock gearing.. I have the same gearing on the stock swing arm and i too am using 96 links (stock amount of links) I'd imaged that for a +3 swinger you would probably need at least another 6 or 7 links (just a guess though) I would buy 10 links and see what that does for you..

parker05_05 · 09-03-2011, 07:06 AM

I had this idea. If I'm adding 3" to the arm then I would need a 6" longer chain. right? So I measured 6" of the chain and there is 10 links. So im guessing I'll need 106L chain. Sound good or am I way off ? How good is the did 520 atv chain. I'm guessing its good since did makes it.

spize909 · 09-03-2011, 08:32 AM

a couple minutes of searching turned up this........
Chain Length

parker05_05 · 09-03-2011, 03:57 PM

Thanks. Im going to get the 110 link to be safe. Prob need to take 2-4 off tho.

09-02-2011, 07:14 PM	#1 (permalink)
parker05_05 :::Rookie Rider::: Join Date: Aug 2011 Posts: 39	how many link chain? With 14/40 gearing and extended swing arm 3" how many link chain should I need? Anyone have an idea? Thanks.

09-02-2011, 11:45 PM	#2 (permalink)
Grath :::Ready for a fast quad?::: Join Date: Aug 2011 Location: Boyceville, WI / Downing, WI Posts: 732	Well I have stock swing with 14/4O, I use nine6 links. me keboad wont function at the moment lol missing lettes __________________ 2003 Z400 Engine Mods: Big Gun ES Slip on - Inspection Plug Pull Choke - 170 main - No Lid Wiseco Piston and Rings Suspension, Steering & Chassis: MSR Motion Bars w/ Pro Taper Clamps PRM Rear Skid Plate - DG Alloy Nerfs - LTR Pegs DWT Red Label Front Rims - Stock Rear Rims Maxxis Razr Tires Misc: Modquad Block Off - ProDesign Tether MSR Grips - Crank Breather - Blob Removed 96L/40T/14T Gearing

09-03-2011, 12:03 AM	#3 (permalink)
atv4life95 :::LT500 Rider::: Join Date: May 2011 Location: Westchester NY Posts: 1,245	14/40 is stock gearing.. I have the same gearing on the stock swing arm and i too am using 96 links (stock amount of links) I'd imaged that for a +3 swinger you would probably need at least another 6 or 7 links (just a guess though) I would buy 10 links and see what that does for you.. __________________ 2003 Suzuki Z400 - SOLD Fully Worked & Race Ready, '98 Yamaha YZ125 - My New Toy

09-03-2011, 08:32 AM	#5 (permalink)
spize909 :::Get a life! You're over 5000 posts::: Join Date: Oct 2008 Location: Southern California Posts: 5,264	a couple minutes of searching turned up this........ Chain Length __________________ 2005 Z-400 Mine *January* *2011 QOTM* 2004 Z-400 Brad'Z *October 2011 QOTM* http://www.suzukicentral.com/forums/...tm-winner.html 2004 Z-400 Wife's 1996 Sandsprite IV (sandrail) MINE Sponsors: Coors Light.............I sponsor them! *Life is tough...........it's tougher if you're stupid.*

09-03-2011, 07:06 AM	#4 (permalink)
parker05_05 :::Rookie Rider::: Join Date: Aug 2011 Posts: 39	I had this idea. If I'm adding 3" to the arm then I would need a 6" longer chain. right? So I measured 6" of the chain and there is 10 links. So im guessing I'll need 106L chain. Sound good or am I way off ? How good is the did 520 atv chain. I'm guessing its good since did makes it.

09-03-2011, 03:57 PM	#6 (permalink)
parker05_05 :::Rookie Rider::: Join Date: Aug 2011 Posts: 39	Thanks. Im going to get the 110 link to be safe. Prob need to take 2-4 off tho.

Remove Advertisements Sponsored Links
SuzukiCentral.com Advertisement