2004 z400 oem parts cheep Roll design foot brake

bringepimp4u · 07-03-2010, 12:05 PM

hears a list of parts i have left from the part out

Roll design foot brake 40.00
sub frame 50.00 good condition
rear shock with peps cover and link 25.00
gas tank 15.00
Rear hubs 20.00 each
front hubs 20.00 each
break lever 20.00 with chrome cover
cluch lever 10.00
seat with skin 40.00
sprocket 5.00
renthal sprocket with hub 20.00
tool kit 15.00
oil tank 15.00
handle bar 10.00
radiator fan 20.00
pipe 15.00
front cut plastic 15.00
full wireing harness key coil and ecu 65.00
front spindal 15.00 with shrowd
z400 bar clamp 15.00

all prices are with out shiping buyer pays shiping i only except paypal and i will take offers and do package prices i ship via paypal with ups so tracking number is emailed to the paypal user if you have any ? pm me thanks

Uploaded with ImageShack.us

zr2czy · 07-03-2010, 11:08 PM

PM sent

icanzu · 07-15-2010, 11:58 PM

does the plastic still have the tabs on the bottom of the sides....or are those on top of the side pieces...can't remember off hand. Anyway how much to 65804?

icanzu · 07-27-2010, 01:40 AM

Is this sale still going?

Tuffy · 08-01-2010, 12:35 AM

I would like to get your spindle, front brake lever w/res, z400 bar clamp and would like to get the keyswitch by itself (I don't need the whole harness..). Please let me know what you can do for me on the package deal and pm me back. Thanks

avarageerod · 08-01-2010, 12:43 AM

pm sent on bar clamp

Tuffy · 08-01-2010, 08:48 PM

Didn't get your pm. Could you send again plz?

bringepimp4u · 08-06-2010, 10:53 AM

lots of stuff left guys i am ready to shipp out just let me know what you need i ship threw paypal

jimmerheck · 08-06-2010, 05:48 PM

how much for the entire thumb throttle assembly with throttle cable, and its complete, right? Thanks.

bringepimp4u · 08-07-2010, 10:34 AM

ill do 30.00 shipped for both !!!

bringepimp4u · 08-09-2010, 10:22 AM

oil tank sold

Lenny · 08-10-2010, 03:46 PM

You don't happen to have any tie rods, do you? need the clutch lever side. thanks, and bump for you,

Lenny

bringepimp4u · 08-10-2010, 04:01 PM

sorry no tie rods sold them allready!!!!!

Quote:

Originally Posted by Lenny

You don't happen to have any tie rods, do you? need the clutch lever side. thanks, and bump for you,

Lenny

bringepimp4u · 08-17-2010, 10:39 AM

ttt

duewydo · 08-18-2010, 10:01 PM

he sent me the oil cooler saying that the threads on the drain plug were good. There was a bolt snapped off inside the drain and it isn't even a z400 oil tank and now he isn't responding to my PM.

07-03-2010, 12:05 PM	#1 (permalink)
bringepimp4u :::Mini LT50 Rider::: Join Date: Oct 2006 Location: green bay wisconsin Posts: 77	2004 z400 oem parts cheep Roll design foot brake hears a list of parts i have left from the part out Roll design foot brake 40.00 sub frame 50.00 good condition rear shock with peps cover and link 25.00 gas tank 15.00 Rear hubs 20.00 each front hubs 20.00 each break lever 20.00 with chrome cover cluch lever 10.00 seat with skin 40.00 sprocket 5.00 renthal sprocket with hub 20.00 tool kit 15.00 oil tank 15.00 handle bar 10.00 radiator fan 20.00 pipe 15.00 front cut plastic 15.00 full wireing harness key coil and ecu 65.00 front spindal 15.00 with shrowd z400 bar clamp 15.00 all prices are with out shiping buyer pays shiping i only except paypal and i will take offers and do package prices i ship via paypal with ups so tracking number is emailed to the paypal user if you have any ? pm me thanks Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us __________________ smoke

07-03-2010, 11:08 PM	#2 (permalink)
zr2czy :::Mini LT50 Rider::: Join Date: Apr 2008 Location: Mississippi Posts: 112	PM sent __________________ '05 white z durablue +2/+4 axle Wicked +2 A-arms 2+ AR tie rods (chromemolly) fcr 39mm dyno jet kit polished clutch cover White bro 40t sprocket DG nerf bars w/heel guards Carbon fiber tank cover HID bulbs LED tail light w/custom mount ITP SS112 w/ mx4 holeshots ITP t-9 w/ Sand stars Six pack rack HMF Bill Balance exhaust system K&N Filter w/no lid z400 warning labels AC racing bumper Yoshimura shock covers Tusk racing case saver Dyna CDI

07-15-2010, 11:58 PM	#3 (permalink)
icanzu :::LT500 Rider::: Join Date: Nov 2005 Location: SW Missouri Posts: 1,579	does the plastic still have the tabs on the bottom of the sides....or are those on top of the side pieces...can't remember off hand. Anyway how much to 65804? __________________ CT Racing 440 w/5 angle valve job/porting;+4 crank;KW stainless;12.5:1 Weisco 40mm FCR;185 main;45 pilot;JD needle on 4th;adjustable leak jet;540/539;Vortex cdi FCI intake;CT Sonic exhaust/14 disks Flexx Bars;Dr.D.reverse;tether kill;Power Mads;Houser+1;Precision;IMS nerfs,pegs,heel guards;PRM skids;bull horn;air scoops GTTshock/linkage;Elkas on JD Performance LT+2s;LSR +1.25;Razr2s/HiperTech3s;LSR axcalibur;moose block off;relocated ignition and idiot lights. Now...officially broke....

07-27-2010, 01:40 AM	#4 (permalink)
icanzu :::LT500 Rider::: Join Date: Nov 2005 Location: SW Missouri Posts: 1,579	Is this sale still going? __________________ CT Racing 440 w/5 angle valve job/porting;+4 crank;KW stainless;12.5:1 Weisco 40mm FCR;185 main;45 pilot;JD needle on 4th;adjustable leak jet;540/539;Vortex cdi FCI intake;CT Sonic exhaust/14 disks Flexx Bars;Dr.D.reverse;tether kill;Power Mads;Houser+1;Precision;IMS nerfs,pegs,heel guards;PRM skids;bull horn;air scoops GTTshock/linkage;Elkas on JD Performance LT+2s;LSR +1.25;Razr2s/HiperTech3s;LSR axcalibur;moose block off;relocated ignition and idiot lights. Now...officially broke....

08-01-2010, 12:43 AM	#6 (permalink)
avarageerod :::Mini LT80 Rider::: Join Date: May 2010 Posts: 260	pm sent on bar clamp __________________ Eyeball Eng. +4 swingarm, Burgard +3 a-arms, ITP Holeshot tires, Blingstar front bumper, Trail Tech x-bars, Quadtech seat cover, ASV levers, Yoshimura slip on exhaust, Outlaw Racing gas cap, Velocity Intake airbox eliminator with a K&N air filter, G-Force +2 extended rear hubs, Keihin carburetor with a Dynajet kit, new rear brake rotor, and new extended braided front brake lines with clamps, KFX front nose piece, KFX 450r front shocks, IMS 4 gal tank

08-01-2010, 12:35 AM	#5 (permalink)
Tuffy :::Rookie Rider::: Join Date: Jul 2010 Location: Greensboro, North Carolina Posts: 27	I would like to get your spindle, front brake lever w/res, z400 bar clamp and would like to get the keyswitch by itself (I don't need the whole harness..). Please let me know what you can do for me on the package deal and pm me back. Thanks

08-01-2010, 08:48 PM	#7 (permalink)
Tuffy :::Rookie Rider::: Join Date: Jul 2010 Location: Greensboro, North Carolina Posts: 27	Didn't get your pm. Could you send again plz?

08-06-2010, 10:53 AM	#8 (permalink)
bringepimp4u :::Mini LT50 Rider::: Join Date: Oct 2006 Location: green bay wisconsin Posts: 77	lots of stuff left guys i am ready to shipp out just let me know what you need i ship threw paypal __________________ smoke

08-06-2010, 05:48 PM	#9 (permalink)
jimmerheck :::Rookie Rider::: Join Date: Aug 2010 Location: Vancouver, WA Posts: 5	how much for the entire thumb throttle assembly with throttle cable, and its complete, right? Thanks.

08-07-2010, 10:34 AM	#10 (permalink)
bringepimp4u :::Mini LT50 Rider::: Join Date: Oct 2006 Location: green bay wisconsin Posts: 77	ill do 30.00 shipped for both !!! __________________ smoke

08-09-2010, 10:22 AM	#11 (permalink)
bringepimp4u :::Mini LT50 Rider::: Join Date: Oct 2006 Location: green bay wisconsin Posts: 77	oil tank sold __________________ smoke

08-10-2010, 03:46 PM	#12 (permalink)
Lenny :::Mini LT50 Rider::: Join Date: Aug 2010 Posts: 50	You don't happen to have any tie rods, do you? need the clutch lever side. thanks, and bump for you, Lenny

08-17-2010, 10:39 AM	#14 (permalink)
bringepimp4u :::Mini LT50 Rider::: Join Date: Oct 2006 Location: green bay wisconsin Posts: 77	ttt __________________ smoke

08-18-2010, 10:01 PM	#15 (permalink)
duewydo :::Mini LT80 Rider::: Join Date: Apr 2005 Posts: 171	he sent me the oil cooler saying that the threads on the drain plug were good. There was a bolt snapped off inside the drain and it isn't even a z400 oil tank and now he isn't responding to my PM. __________________ 2004 z400, Hot cams, removed snorkel on air box, DRZ mod (springs and head gasket.) Kibble White Black Diamond Valves. DynoJet needle and jet. Dyna F.S. programmable ignition. DID cam chain. Pro taper bars. Pro Armor nerf/heel bars. AC skid plate. AC front bumper. 06 adjustable front shocks.+2 Roll Design Steering Stem. Burgard +2+1 A arms. RPM +4 adjustable rear axle.

Remove Advertisements Sponsored Links
SuzukiCentral.com Advertisement