![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
![]() |
|
|
|
|
#1 (permalink) |
|
:::Rookie Rider:::
|
Hey whats up guys I finally got myself a Zilla . I have wanted one of these for as long as i can remember . I have had several fast full race Banshee's (still have 1) and a 03 ltz 400 with alot of mods But anyhow check it out. picked up last night the guy i got it from had to 60, said his son owned for 11 years so he couldn't tell what had been done to it. It has a FMF Fatty with a powercore. has Keihin carb didnt check the size will in the morning think its after market. came with nerfbars and lonestar steering stem not installed yet (tomorrow) . Its A 1989 I got him down to 1800(seems to be a fair deal) .
I take it for a spin today and the clutched seemed to slip a little when u would just run it up a little in the gears. Gonna change the oil tomorrow and see if helps any. Have to play with some jetting being its so cold its a little lean. But i have been reading all the post trying to get all i can . I have questions and looks like a came to right place. heres a couple pics will get more. let me know what u think and any advise will be greatly appreciated ![]() ![]() ![]() think im in need of some Rx
__________________
2003 z400 1989 quadzilla !!!!any questions!!!! my z400-450 more and more OK 1 MORE 1989 Quadzilla Zilla |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#5 (permalink) |
|
:::Ready for a fast quad?:::
Join Date: Oct 2006
Posts: 727
|
Seems to be a lil more information on this model here
http://www.quadracerhq.com/forum/forumdisplay.php?f=20
__________________
Honest Obama Supporter 06 DVX400/\12.1 Stock Bore Piston/\DRZ Base Gasket/\OSHC's/\HMF Bill Ballance FS/\Edelbrock 34x48mm oval Carb/\Houser +2/+3/4" LT Arms/\Houser +1-1/4 LT Swinger w/LT linkage/\Elka Elite Triple Rates w/rezzies LT Fronts/\Elka Elite Triple Rate w/remote rezzie LT Rear/\LoneStar Axle/\Hiper Tech 3's 9" rears 10" fronts/\Holeshot GNCCs/\Acerbis Handguards/\Tag X5 Bars Red Z400 Bend/\Pro Armor Fat Bar Nerfs/\PRM Summit Bumper/\PRM Desert Grab Bar/\PRM .25 Full Belly Skid/Swinger Skid |
|
|
|
|
|
#6 (permalink) |
|
:::Z-250 Rider:::
Join Date: Jan 2008
Location: bakersfield
Posts: 442
|
nice quad
watch the kick back it will snap youre leg in haft.
__________________
je 434 big bore hot cams port and polish head 400ex intake fullbore plastic amr grapfics pro taper bars chrome steering stem hole shot tires front and rear 15/40 gearing barnett clutch stock cdi box sparks pipe air charger 39mm fcr carb 170 main jet dual bead lock hiper wheels with orange rings did cam chain alum air scoops dura-blue axel. |
|
|
|
|
|
#7 (permalink) |
|
:::Vinson Rider...wtf?:::
Join Date: Mar 2007
Posts: 707
|
everything2stroke is a great place for info on that model too.
damn that thing is clean
__________________
03 z: Moose Racing bars/Oury grips Alba Stage 2 Jetting Custom "slip on"(straight through stock muffler-NO baffles) Outerwears Airbox Lid TM Designworks chain slider Primary Drive Chain and Sprockets 14/40 bald tires AC Skid, never recieved. RIPPED OFF BY--- HUNG UP Z400, thanks for nothin |
|
|
|
|
|
#9 (permalink) |
|
:::Post Whore:::
Join Date: Apr 2008
Location: Just south of civilization
Posts: 1,759
|
Dude seriously....?
![]() The compression kick back from the kicker... that's "kick back"
__________________
2003 LTZ 400 Wiseco 13.5:1 90mm piston, +4mm crank, DRZe gasket set, Ported head, HotCams, UNI POD Filter, MotoWorks muffler, Swirl polished valves, Dyna CDI, Maxxis Razr tires,LTR shocks front and modified TRX rear, 15/38 gearing, TAG Front Bumper, TAG Skid Plate, MCCT mod, Pro Circuit Headpipe, FCR39 -165main 45 pilot 1.25 turns out J&J Racing #505 13yrs personal engine experience Dirty Penguin Race Team Member |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|