Suzuki Z400 Forum : Z400 Forums http://www.suzukicentral.com/forums/ The ATV Channel - Your #1 source for ATV news, reviews, racing, contests, pictures, videos, wrecks and more! en Tue, 21 May 2013 06:49:26 GMT vBulletin 60 http://www.suzukicentral.com/forums/images/SuzukiCentral/misc/rss.jpg Suzuki Z400 Forum : Z400 Forums http://www.suzukicentral.com/forums/ Trade for 05 yfz??? http://www.suzukicentral.com/forums/14-suzuki-loft/106121-trade-05-yfz.html Tue, 21 May 2013 04:40:03 GMT So this guy on Craigslist is willing to trade his 05 yfz 450 for my 07 ltz 400..his yfz has stage one Elkas new tires nd rims and a fresh top... So this guy on Craigslist is willing to trade his 05 yfz 450 for my 07 ltz 400..his yfz has stage one Elkas new tires nd rims and a fresh top end...what you guys think worth it or naw? ]]> Suzuki Loft Otto76689 http://www.suzukicentral.com/forums/14-suzuki-loft/106121-trade-05-yfz.html <![CDATA[Idle's fine but boggs when revved]]> http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/106113-idles-fine-but-boggs-when-revved.html Tue, 21 May 2013 04:11:38 GMT So after replacing the entire rear end on the quad I get everything back together and now it does not run right. The Z will start up and idle perfect... So after replacing the entire rear end on the quad I get everything back together and now it does not run right. The Z will start up and idle perfect but any time i give it gas it just boggs out. There is times when I attempt to drive it that it will bogg then all of a sudden it gets a rush of power and take off and then it will all of a sudden bogg down again a few seconds later. I have replaced the spark plug and drained the gas and replaced it with new gas. I have removed the petcock and checked it for a clog but everything is clear there. i have checked my jets and as far as i can see they look clear. like I have said it starts and idles perfect it just wont rev up.. any suggestions.. thanks ]]> Maintenance/Repairs/Tuning Tvp125 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/106113-idles-fine-but-boggs-when-revved.html Greetings fro CA! http://www.suzukicentral.com/forums/108-new-member-introductions/106105-greetings-fro-ca.html Tue, 21 May 2013 03:19:11 GMT Thanks everyone....

I've been lurking a couple weeks after I decided to get a quad and learned a lot here. I've been looking on CL and lots of other sites for about a month for the right deal. I saw a few that caught my eye, but finally picked up a real clean '06 KFX a few days ago.
Now which brand of oil is the best? :icon_biggrin:
j/k I'll post some pics once I get it cleaned up....

Jay ]]> New Member Introductions SoCalJ http://www.suzukicentral.com/forums/108-new-member-introductions/106105-greetings-fro-ca.html Wtb seat http://www.suzukicentral.com/forums/32-wanted/106097-wtb-seat.html Mon, 20 May 2013 21:23:47 GMT what the title says......im looking for a seat for a 04 or above z400.....the cover doesn't have to be perfect as im wanting the seller to ship it to JETTRIM (instead of me to save me time) so that I can get it recovered, but the foam and seat pan will need to be in good shape.

I emailed them asking if they could do my z400 seat cause they look like they are extremely well built. the lady emailed me back and said I would have to send in my seat....well im not down to have a "down" bike lol.

im wanting to get it done like this one, but I want a tribal or the old school pinstriping


here is the seat cover design. (JETTRIM use to make the quad techs)
Quad Tech - Seat Cover Stock LTZ 400 [SCS1-S3 | SCS1-S4] - ATV Carbon Fiber World Leader

here is the stich patterns im choosing from (either lines#1, lines2 or the tribal)
Custom Stitch Designs

if you have one PM me and let me know the price shipped
THANKS ]]> Wanted brapp1988 http://www.suzukicentral.com/forums/32-wanted/106097-wtb-seat.html Looking for good stator and one way starting clutch http://www.suzukicentral.com/forums/32-wanted/106089-looking-good-stator-one-way-starting-clutch.html Mon, 20 May 2013 20:36:42 GMT Had the 6 bolts in flywheel shear off and come apart and make a mess, looking for stater clutch on back of flywheel and bolts or flywheel complete. ... Had the 6 bolts in flywheel shear off and come apart and make a mess, looking for stater clutch on back of flywheel and bolts or flywheel complete.
Also need a good stator, if anyone has anything let me know. Shoot me a pm please. Thanks. ]]> Wanted g-rider http://www.suzukicentral.com/forums/32-wanted/106089-looking-good-stator-one-way-starting-clutch.html R.i.p z400. 05/20/2013 http://www.suzukicentral.com/forums/102-builds-rebuilds/106081-r-i-p-z400-05-20-2013-a.html Mon, 20 May 2013 20:07:07 GMT Hell everyone I'm not sure if this is the right section for this. Weel I sent my Z400 to Turn 1 Motorsports in Plymouth, IN last friday. Did not start but had spark and fuel. Would start when I pull it behind my friends truck but ran TERRIBLE. I figured it would need valve adjustment. That's why I took it there. Get a call today, guy says valves were in-spec on Intake, exhaust were out. So they readjusted them and everything. Tried to start, and nothing. So next was leak-down test. My cam chain tensioner failed, bad compression, and possibly a bend valve. Said top-end will need re-built as well... But they wants over $1,600 to do and 2 months. I'll just do-it-myself.
So this is basically start of a rebuild, I guess. Once some cash flow starts coming in I'll hop on it, but teardown should start this weekend. If any of you guys have any tips on ANYTHING??????? Teardown, engine rebuild, part suggestions, ANYTHING! Please feel free to let me know. I'm thinking 440 Kit and some stage 2 cams ;) Also there are pics of my Z in the Photo Gallery section (White w/ Blk hood) as she sits now so you all can see what parts she has. Not a ton but some. Thanks everyone, sorry so lengthy. ]]> Builds and Rebuilds Kyleliston290 http://www.suzukicentral.com/forums/102-builds-rebuilds/106081-r-i-p-z400-05-20-2013-a.html idle ? http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/106073-idle.html Mon, 20 May 2013 20:01:09 GMT I am having a tough time setting my idle on 04 kfx. I can't find a "sweet spot" It idles really high, and when I adjust it down, I turn it a hair of a fraction each time and nothing happens untill I get to a point where it gets way to low. I can't get it where I want. My idle screw on carb is out 2 1/4 turns. Any ideas? ]]> Maintenance/Repairs/Tuning matt1932 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/106073-idle.html 05 + front shocks http://www.suzukicentral.com/forums/32-wanted/106065-05-front-shocks.html Mon, 20 May 2013 14:26:14 GMT I haven't been having any luck finding a set. Show me what you got and shipped to 08087. I guess pay through pay pal. Thanks in advance. ]]> Wanted Summertop511 http://www.suzukicentral.com/forums/32-wanted/106065-05-front-shocks.html Yoshimura Exhaust http://www.suzukicentral.com/forums/62-performance-parts-f-s/106057-yoshimura-exhaust.html Mon, 20 May 2013 13:54:08 GMT I took an 2006 z400 apart for my hillclimb project and to get rid of some parts to help pay for my project:D the first would be the yoshimura muffler... I took an 2006 z400 apart for my hillclimb project and to get rid of some parts to help pay for my project:D the first would be the yoshimura muffler and head pipe. The only this I can see wrong with it is that there is 2 bolt missing on the end that holds the cap on the muffler. 200 plus shipping. ]]> Performance Parts F/S atherts http://www.suzukicentral.com/forums/62-performance-parts-f-s/106057-yoshimura-exhaust.html 2009 ltz400 noob http://www.suzukicentral.com/forums/73-lt-z400/106050-2009-ltz400-noob.html Mon, 20 May 2013 13:43:00 GMT new to the quad world. just bought an 09 ltz400. bought a power commander and slip on 2 brothers for it. what kind of oil does everyone use when... new to the quad world. just bought an 09 ltz400. bought a power commander and slip on 2 brothers for it. what kind of oil does everyone use when changing oil? ]]> LT-Z400 brendanf_22 http://www.suzukicentral.com/forums/73-lt-z400/106050-2009-ltz400-noob.html LTZ 250/ Ozark Service manual http://www.suzukicentral.com/forums/75-lt-z250/106034-ltz-250-ozark-service-manual.html Mon, 20 May 2013 06:12:47 GMT Does anyone have a service manual that they could look up the torque specs on assembling the engine? I am replacing the topend on my daughters LTZ... Does anyone have a service manual that they could look up the torque specs on assembling the engine? I am replacing the topend on my daughters LTZ 250 and need the torque settings. ]]> LT-Z250 jcain http://www.suzukicentral.com/forums/75-lt-z250/106034-ltz-250-ozark-service-manual.html In need of head cover bolt and seals quickly http://www.suzukicentral.com/forums/32-wanted/106026-need-head-cover-bolt-seals-quickly.html Mon, 20 May 2013 05:33:28 GMT The head cover has three bolt. Two short and one long. Also has a seal on each bolt. I need: - 1 seal for the long bolt - 1 short bolt and the... The head cover has three bolt. Two short and one long. Also has a seal on each bolt. I need:

- 1 seal for the long bolt
- 1 short bolt and the seal that goes on it.

I used these on my sons bike. I thought I had replaced them but the ones I got to replace mine are the wrong ones. This is the only thing keeping me from setting my motor in the frame and cranking it. If you have these parts and can stick them in the mail quickly, let me know. I have no doubt in my mind if I order them from the dealer, they won't be here any time soon. ]]> Wanted kfxguy http://www.suzukicentral.com/forums/32-wanted/106026-need-head-cover-bolt-seals-quickly.html Bear Creek http://www.suzukicentral.com/forums/14-suzuki-loft/106018-bear-creek.html Mon, 20 May 2013 03:23:36 GMT Hey guys. Just wanted to give a quick thanks to the whole community for all of the information that got my z400 riding perfectly. Took it to bear... Hey guys. Just wanted to give a quick thanks to the whole community for all of the information that got my z400 riding perfectly. Took it to bear creek yesterday for the first time. Il tell ya what, coming from an 87 warrior to the z, was insane. It's like running before you crawl. What a blast it was. I drag raced a 400 ex and destroyed him. Went up against a 450r, and if I had better tires I think I would have kept up with him.

Well just sayin I had a blast, if aanyones ever been to bear creek ( or crick, whichever you prefer), feel free to comment on the area! ]]> Suzuki Loft rangatang http://www.suzukicentral.com/forums/14-suzuki-loft/106018-bear-creek.html 07 z400 fuel in oil/ running like shi* http://www.suzukicentral.com/forums/59-tech-help/106010-07-z400-fuel-oil-running-like-shi.html Mon, 20 May 2013 02:49:05 GMT i want to buy my friends z400 if i can get it fixed. He wants 1000$ for it. when i pulled the dip stick oil shot out like it had alot of pressure.... i want to buy my friends z400 if i can get it fixed. He wants 1000$ for it.

when i pulled the dip stick oil shot out like it had alot of pressure. Bike was off. oil smelled like gas

the last time her rode it about 4 weeks ago he cased a jump and it ran like crap ever since then.

ive drained the gas put in fresh but when i put the petcock to pri just a little trickle comes out of the hose?

i want the bike if i can get it running. does it sound major? ]]> Tech Help westtt80 http://www.suzukicentral.com/forums/59-tech-help/106010-07-z400-fuel-oil-running-like-shi.html Best mounting intake rubber for FCR to z engine http://www.suzukicentral.com/forums/15-performance-parts/106002-best-mounting-intake-rubber-fcr-z-engine.html Mon, 20 May 2013 02:48:08 GMT Has anybody came up with a good way to mount the fcr to our engines? I know the stock mounting intake will work but it is a tight fit and is a bit... Has anybody came up with a good way to mount the fcr to our engines? I know the stock mounting intake will work but it is a tight fit and is a bit smaller than the inside of the carb. Is there an intake from another machine that works better? I used the stock one myself for a while but now have a piece of auto gas tank hose. Only thing I don't like about that is that the air and fuel will hit the edge of the head and could possibly affect the flow of air and fuel to the engine. What all are you guys running? Figured there was enough FCR guys out there now that somebody has came up with a good setup. ]]> mvvette97 http://www.suzukicentral.com/forums/15-performance-parts/106002-best-mounting-intake-rubber-fcr-z-engine.html Fuel Petcock http://www.suzukicentral.com/forums/59-tech-help/105994-fuel-petcock.html Sun, 19 May 2013 23:51:23 GMT Ok this is a stupid question but here goes...I have bin around motorcycles and quads my whole life just bought a 2013 Z400 and does it have a petcock... Ok this is a stupid question but here goes...I have bin around motorcycles and quads my whole life just bought a 2013 Z400 and does it have a petcock ? ]]> Tech Help redrocker http://www.suzukicentral.com/forums/59-tech-help/105994-fuel-petcock.html Ultimate dune ready Suzuki LTR493, MUST SEE http://www.suzukicentral.com/forums/61-complete-quads-f-s/105986-ultimate-dune-ready-suzuki-ltr493-must-see.html Sun, 19 May 2013 22:00:59 GMT This is my friends well built, mint '08 LTR for sale:
Motor: DT Performance of Utah Custom Designed and built the motor. Its a 493 Big Bore, DT Ported Head, custom cut DT Designed Web Cams, Custom Designed DT CP 13.75 Piston, 45mm Throttle Body, KMS Intake, DMC Fuel Box, Dyna Coil, Cherry bomb chip, DASA Exhaust. The motor Dyno's at 57/hp and 37/ft lbs of torque on KBR's Dyno of Utah.
Extras: One industries Graphic kit, Quad tech seat and front nose, CCP Steering Stabilizer, Trail Tech led lights and X bars w/risers, Tusk gas cap, Bling star case saver, Trinity battery cover, HEP fender brackets, Lone Star Axle & arms, all Billet hubs, Wave Rotor, DID gold chain, Renthal sprockets, Full PEP Suspension, Skat Trak Mohawks and 8 Paddle Beed to Beed Gliders. Under 25 hours and in perfect condition, runs amazing. All receipts and Dyno sheets available. Never seen a track or jumped
He's asking $7500

Attached Thumbnails
Click image for larger version Name: LTR.jpg Views: N/A Size: 45.7 KB ID: 15170   Click image for larger version Name: LTR #5.jpg Views: N/A Size: 48.5 KB ID: 15178   Click image for larger version Name: LTR #9.jpg Views: N/A Size: 49.7 KB ID: 15186   Click image for larger version Name: LTR #10.jpg Views: N/A Size: 57.9 KB ID: 15194   Click image for larger version Name: LTR #7.jpg Views: N/A Size: 44.1 KB ID: 15202  

Click image for larger version Name: LTR #11.jpg Views: N/A Size: 41.4 KB ID: 15210   Click image for larger version Name: ltr #12.jpg Views: N/A Size: 51.0 KB ID: 15218  
]]> Complete Quads F/S Buddah http://www.suzukicentral.com/forums/61-complete-quads-f-s/105986-ultimate-dune-ready-suzuki-ltr493-must-see.html fuel controller http://www.suzukicentral.com/forums/15-performance-parts/105978-fuel-controller.html Sun, 19 May 2013 21:48:11 GMT Hello I thinking about buying a fuel controller for my 09' z with full yoshi rs2 system. I'm just not sure about fuel controller which one should I buy. Do you think pim2 gonna be good decision? I don't have a laptop so it's look like smart decision because pim2 have two maps installed for rs2 with lid on and off. But I not sure if I can install it by myself I checked the instruction and it's look little complicated. What do you guys think what's best fuel controller for efi z?
Btw: pim2 have map installed for pump 91 and I'm using 95 do you think it's gonna make big difference? ]]> kek http://www.suzukicentral.com/forums/15-performance-parts/105978-fuel-controller.html Athena 434 piston rings http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105962-athena-434-piston-rings.html Sun, 19 May 2013 18:13:34 GMT Does anyone know where i can get some replacement rings for my 93.94mm piston ASAP! I have checked everywhere and everyone is out till 1st or 2nd... Does anyone know where i can get some replacement rings for my 93.94mm piston ASAP! I have checked everywhere and everyone is out till 1st or 2nd week of june. Maybe another option besides athena rings? I have some ordered but i need some quicker than the middle of june. ]]> Maintenance/Repairs/Tuning kfxmatt http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105962-athena-434-piston-rings.html 03 z400 lost fire http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105954-03-z400-lost-fire.html Sun, 19 May 2013 14:55:24 GMT Was riding down a trail and it just died has no fire anyone know how to help me find the issue Was riding down a trail and it just died has no fire anyone know how to help me find the issue ]]> Maintenance/Repairs/Tuning 03z400matt http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105954-03-z400-lost-fire.html lost fourth and fifth gear http://www.suzukicentral.com/forums/59-tech-help/105946-lost-fourth-fifth-gear.html Sun, 19 May 2013 12:31:03 GMT i was trail riding yesterday and i lost fourth and fifth gear a little while later they are back im guessing its only temporary fix any... i was trail riding yesterday and i lost fourth and fifth gear a little while later they are back im guessing its only temporary fix any thoughts on this i realize i am going to pull the motor just wondering if anyone has ever heard of this no grinding just lost them like it was in nuetral ]]> Tech Help gene preston http://www.suzukicentral.com/forums/59-tech-help/105946-lost-fourth-fifth-gear.html Single layer head gasket? http://www.suzukicentral.com/forums/59-tech-help/105938-single-layer-head-gasket.html Sun, 19 May 2013 06:18:56 GMT I'm throwing the towel in for the night on my build. My piston is .020 in the hole more than I want. I was thinking (one of the ideas I have) of drilling the rivits off my head gasket and use just one of the black layers to put me where I want to be. Has anyone tried this? I'm thinking probably not, but what could it hurt? I actually did this on my ltz250 about 7 years ago and is still going with no problems. It's air cooled tho, I'm just wondering if the single gasket would seal good enough with a water cooled engine. I don't see why it wouldn't work, but hey, it's almost 1:30a.m. and I'm pretty tired! :lol ]]> Tech Help kfxguy http://www.suzukicentral.com/forums/59-tech-help/105938-single-layer-head-gasket.html <![CDATA[Oil-less K&N style filter]]> http://www.suzukicentral.com/forums/14-suzuki-loft/105930-oil-less-k-n-style-filter.html Sun, 19 May 2013 04:13:36 GMT Wonder how these are? Reviews and testing would indicate might be something to watch. Developed with K&N.
I cam across it looking for a AFE 7 ply filter. I was thinking of going to FCI and asking if he could get me an 8 ply with a 3" inlet. My new buggy(single filter, fuel injected) is 3" just like the quads. ]]> Suzuki Loft spize909 http://www.suzukicentral.com/forums/14-suzuki-loft/105930-oil-less-k-n-style-filter.html Beginner Mods ??? http://www.suzukicentral.com/forums/28-frequently-asked-questions/105922-beginner-mods.html Sun, 19 May 2013 01:19:23 GMT Looking at an 04 Z400 that my buddy has had sitting in his garage for a couple years with little to no riding of the bike. Planning on buying it... Looking at an 04 Z400 that my buddy has had sitting in his garage for a couple years with little to no riding of the bike.

Planning on buying it for about 1500 then taking it to the dealership and getting a complete tune up done. All new fluids, plugs, all the good stuff.

Havent had a chance to go look at it or even start it so what should I be looking for problem wise besides obviously not starting lol. Im figuring new fluids, complete crab rebuild, and some fresh gas to start off.

What are some beginner mod that you guys would start off, dont plan on racing the bike at the moment but I know how forums can be :p. Trying to keep the mods on the low end for now. Lets see a list of mods you guys would start with.

Only thing I know about the bike is that its got a yoshi pipe, not sure if its slip on or full kit. ]]> Frequently Asked Questions Bellassaiw10 http://www.suzukicentral.com/forums/28-frequently-asked-questions/105922-beginner-mods.html New From NC http://www.suzukicentral.com/forums/108-new-member-introductions/105906-new-nc.html Sat, 18 May 2013 23:54:35 GMT New member from Currituck, NC. Looking at purchasing a 04 Z400 from a buddy who doesnt ride anymore. Currently an MP for the NC Nasty Guard and a... New member from Currituck, NC. Looking at purchasing a 04 Z400 from a buddy who doesnt ride anymore. Currently an MP for the NC Nasty Guard and a Junior at East Carolina University.

Hoping to get some questions answered about what to expect and where to start with the mods :D

Rode a few of my buddies Z's, Raptors and one YFZ so hoping to get into riding a little bit ]]> New Member Introductions Bellassaiw10 http://www.suzukicentral.com/forums/108-new-member-introductions/105906-new-nc.html Can not get valve adjustment with in spec http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105898-can-not-get-valve-adjustment-spec.html Sat, 18 May 2013 20:23:15 GMT I did a valve adjustment on my 03 ltz400 the only one I can not get into spec in the intake closest to the timing chain removed shims and still no... I did a valve adjustment on my 03 ltz400 the only one I can not get into spec in the intake closest to the timing chain removed shims and still no gap. What do I need to change to get my valves adjusted. Motor has major valve train noise. This started out hard start. Starts easy now just need to fix noise ]]> Maintenance/Repairs/Tuning Ripster74 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105898-can-not-get-valve-adjustment-spec.html Pro armor nerf bar mounting question?? http://www.suzukicentral.com/forums/16-suspension-chassis/105890-pro-armor-nerf-bar-mounting-question.html Sat, 18 May 2013 17:51:07 GMT 2013 Z400 Got the Fat peg Pro Armor nerf bars. The foot peg holes do not line up at all. I tried them with the gusset up and down... 1: Does... 2013 Z400
Got the Fat peg Pro Armor nerf bars. The foot peg holes do not line up at all.
I tried them with the gusset up and down...

1: Does the gusset go on the top or bottom? (looks to me like it should go up)

Either way they will not fit.

2: Has anyone installed these on a late model Z and not had to drill out the one hole in the center of the peg?

Thanks for any input.
Stryker ]]> Suspension and Chassis Stryke Two http://www.suzukicentral.com/forums/16-suspension-chassis/105890-pro-armor-nerf-bar-mounting-question.html Rifle Advice http://www.suzukicentral.com/forums/14-suzuki-loft/105882-rifle-advice.html Sat, 18 May 2013 16:38:38 GMT About a month ago I put up a matco 56" toolbox for sale/trade on the Miami Craigslist and I got an offer on an AR-15 50.cal beowulf. I've wanted an AR for quite sometime, but I really don't know enough about them to be sure if the trade is worth it.

This is my toolbox I put up


This is the AR-15 he's offering


Any opinions? Things I should look for when I go see it?

I plan on selling it or either trading for a quad since it'll be a lot easier to move a gun than a toolbox. ]]> Suzuki Loft klutch http://www.suzukicentral.com/forums/14-suzuki-loft/105882-rifle-advice.html 06 LTZ 400 gas overflow and choke http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105874-06-ltz-400-gas-overflow-choke.html Sat, 18 May 2013 15:28:19 GMT Sorry didn't really know how to title this one lol but anyways my LTZ runs perfectly if you keep the choke on which leads me to think the pilot jet is broke or jammed? Also I leak a lot of gas out of the overflow when my petcock is on res and prime but when I put it to "on" it's still leaks but not near what it does on prime and res so is the petcock bad or is the needle on the float stuck or broke? ]]> Maintenance/Repairs/Tuning JarrodWolf http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105874-06-ltz-400-gas-overflow-choke.html z400 dies after 15min amd wont start http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105866-z400-dies-after-15min-amd-wont-start.html Sat, 18 May 2013 14:11:47 GMT I have a 2004 z400. New DID CHAIN. new coil . new plug .Cleaned carb. valves shimmed. new battery. starts great n easy. ride for about 15 min n it... I have a 2004 z400. New DID CHAIN. new coil . new plug .Cleaned carb. valves shimmed. new battery. starts great n easy. ride for about 15 min n it dies like u just shut it off. no piblems or noises or sputtering prior. valves look good. fresh gas. i rode it few weeks ago for about 5 hrs. took it home washed it n now does what i stated. even took off gas cap and let run n does same. tried res prime n on poaition for petcock all same thing. please help ]]> Maintenance/Repairs/Tuning z40078 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105866-z400-dies-after-15min-amd-wont-start.html Found a good reason to own a KTM engine. http://www.suzukicentral.com/forums/14-suzuki-loft/105858-found-good-reason-own-ktm-engine.html Sat, 18 May 2013 13:52:49 GMT Image: https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/68674_371271246318421_1614741305_n.jpg ]]> Suzuki Loft SpeedyPedie http://www.suzukicentral.com/forums/14-suzuki-loft/105858-found-good-reason-own-ktm-engine.html Upcoming holiday. http://www.suzukicentral.com/forums/53-west/105850-upcoming-holiday.html Sat, 18 May 2013 05:52:24 GMT Where's everyone going? I was going to go camp with my wife in josh tree with my youngins but seeings as how we're divorcing I'm having to rethink that trip.im thinking pismo .wheres everyone going? ]]> West Johnone1 http://www.suzukicentral.com/forums/53-west/105850-upcoming-holiday.html MWEDT TT Race 5-18-13 Hat Box Field, Muskogee, Ok. http://www.suzukicentral.com/forums/48-mx-tt-flat-track/105842-mwedt-tt-race-5-18-13-hat-box-field-muskogee-ok.html Sat, 18 May 2013 04:25:23 GMT Any of you guys gonna make it? Scott and Dakota went down for practice tonight. They said the track was big and mad fast, wish I could go.... Any of you guys gonna make it? Scott and Dakota went down for practice tonight. They said the track was big and mad fast, wish I could go. :bawling: I told them that a couple of you might be there so swing on by the pits and check the bikes out. ]]> MX/TT/Flat-track SpeedyPedie http://www.suzukicentral.com/forums/48-mx-tt-flat-track/105842-mwedt-tt-race-5-18-13-hat-box-field-muskogee-ok.html Fcr 39 for sale! http://www.suzukicentral.com/forums/62-performance-parts-f-s/105834-fcr-39-sale.html Sat, 18 May 2013 04:00:03 GMT I got a FCR 39 with the the fuel screw, throttle and cable for sale. I'm asking 200$ plus shipping and Im only shipping to canada and if i cant get it gone will probably ship to us later ]]> Performance Parts F/S shanon420 http://www.suzukicentral.com/forums/62-performance-parts-f-s/105834-fcr-39-sale.html 2008 LT-Z250 help http://www.suzukicentral.com/forums/75-lt-z250/105818-2008-lt-z250-help.html Sat, 18 May 2013 01:16:46 GMT I have the engine apart. What are the torque specs on jug, head and valve cover? I have the engine apart. What are the torque specs on jug, head and valve cover? ]]> LT-Z250 jcain http://www.suzukicentral.com/forums/75-lt-z250/105818-2008-lt-z250-help.html Case saver bolt broke http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105810-case-saver-bolt-broke.html Fri, 17 May 2013 23:58:16 GMT Hey ya'll my new chain has been stretching kind of weird lately...i adjust it correctly and all but it will stretch a good bit. i Purchased a primary drive gold xring chain which is supposed to be a very good chain. Well just ot make sure everything was in order i went to pull the front sprocket cover after riding today to check the front sprocket and the top bolt broke off that holds the case saver on. I read a couple of threads about this happening to people and never really got a good answer. Has this ever happened to anyone? If so how did you fix it? Thank you for your time. ]]> Maintenance/Repairs/Tuning rockstarZ400 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105810-case-saver-bolt-broke.html z400 wont run when petcock valve is on http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105802-z400-wont-run-when-petcock-valve.html Fri, 17 May 2013 23:06:30 GMT hi, i recently put a pipe and jetting on my bike and ran it for about 3 days pretty hard like that. runs good not lean or rich but i was riding in... hi, i recently put a pipe and jetting on my bike and ran it for about 3 days pretty hard like that. runs good not lean or rich but i was riding in 5th and went to hammer down and it sputtered then shut off. i pulled over and gave it 5 min and started it on reserve, turned the petcock back to on and went another mile and it did it again??? now it only runs good on prime please help!! thanks. by the way im running 93 in it and it started to act up a little later with the 93 ]]> Maintenance/Repairs/Tuning htaylor-z400 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105802-z400-wont-run-when-petcock-valve.html help! green wire mod ???? http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105794-help-green-wire-mod.html Fri, 17 May 2013 22:57:03 GMT i am considering a new cdi maybe dyna or somthing but i am not sure about the valve work. amy knowledge on the green wire mode would be very helpful.... i am considering a new cdi maybe dyna or somthing but i am not sure about the valve work. amy knowledge on the green wire mode would be very helpful. would i have to adjust valves ? thank you !!! ]]> Maintenance/Repairs/Tuning htaylor-z400 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105794-help-green-wire-mod.html Motoworks Price Increase June 1 http://www.suzukicentral.com/forums/86-kb-motorsports/105786-motoworks-price-increase-june-1-a.html Fri, 17 May 2013 19:58:27 GMT "Dealers/Customers,

Motoworks will be raising prices across the entire line as of 6/1/2013 due to an increase of cost in materials to manufacture the product. We appreciate your understanding and look forward to the future.

Motoworks "



Motoworks Exhaust ]]> KB Motorsports kbm http://www.suzukicentral.com/forums/86-kb-motorsports/105786-motoworks-price-increase-june-1-a.html Need some ideas on an exhaust project http://www.suzukicentral.com/forums/14-suzuki-loft/105778-need-some-ideas-exhaust-project.html Fri, 17 May 2013 17:39:15 GMT Hey guys, I need some ideas for an exhaust project. No, this Im not making a real, rideable exhaust. I have a project for school and in order to... Hey guys, I need some ideas for an exhaust project. No, this Im not making a real, rideable exhaust. I have a project for school and in order to graduate we have to come up with a project and present about it. So since I like to ride, I thought making an exhaust would be perfect. I have to make a blueprint for it, which im going to do a 3D one on a computer. So what would be some good dimensions, style, color, etc. I want it to put out lots of HP and beat out all the rest of the competition (Remember its fake). So i thought who brtter to ask than people who know what they're talking about. Thanks a lot guys ]]> Suzuki Loft decaff18 http://www.suzukicentral.com/forums/14-suzuki-loft/105778-need-some-ideas-exhaust-project.html PRO ARMOR swing arm skid plate: model change?? http://www.suzukicentral.com/forums/16-suspension-chassis/105770-pro-armor-swing-arm-skid-plate-model-change.html Fri, 17 May 2013 13:36:48 GMT Hey guys, I need to know something with the pro armor skid plate for the swing arm... Apparently there has been a model change through the... Hey guys,

I need to know something with the pro armor skid plate for the swing arm...

Apparently there has been a model change through the years...

there's this model


and there's this model


Which one is the new model, and what's the difference besides that 1 model exists out of 2 parts and the other one not?

Thanks! ]]> Suspension and Chassis schott http://www.suzukicentral.com/forums/16-suspension-chassis/105770-pro-armor-swing-arm-skid-plate-model-change.html velocity intake system http://www.suzukicentral.com/forums/15-performance-parts/105762-velocity-intake-system.html Fri, 17 May 2013 05:51:38 GMT so now that i got my fuel controller and got it tuned, im looking at a new intake. im leaning towards the velocity intake but i got one question. it... so now that i got my fuel controller and got it tuned, im looking at a new intake. im leaning towards the velocity intake but i got one question. it looks like it doesn't support that black hose that is on the stock boot? i did some searching on the intake boot hose and i didn't really get much info besides the fact that it goes in to the black mystery box, i think? so main question is what is the hose for and can i just let it hang? ]]> 1q23r http://www.suzukicentral.com/forums/15-performance-parts/105762-velocity-intake-system.html 2003 kfx400 troubles http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105754-2003-kfx400-troubles.html Fri, 17 May 2013 00:18:00 GMT Alright, i've been working on a project of a kfx400, bought it as a basket case, and slowly been putting it together. Today i got the motor in along with new oil, coolant, new jets (full trinity pipe and intake with filter) 165 main/25 pilot two turns out. Motor and everything turns over fine, but only starts when i spray some starting fluid in the carb, when it does start it runs for maybe 3 seconds then cuts off. Here's the thing when i pour gas straight into the carb from a bottle it will run longer than it did with the spray of either. But still cuts out after about 5 second regardless of how much gas i give it or dont give it. The carb is clean, it has brand new jets, i'm running it on prime so that should eliminate the vacuum issue. But i'm kind of stuck as far as where to go here. I know my gas is good, it pours out when in prime. Does anyone have any suggestions or thing i should try? Thanks. ]]> Maintenance/Repairs/Tuning truckcap22 http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105754-2003-kfx400-troubles.html WTB complete running z400 motor http://www.suzukicentral.com/forums/32-wanted/105746-wtb-complete-running-z400-motor.html Thu, 16 May 2013 22:47:29 GMT looking for a complete z400 motor. can be built or stock. If built cant be too radical. text me with whatcha got (386)-288-2570 looking for a complete z400 motor. can be built or stock. If built cant be too radical. text me with whatcha got (386)-288-2570 ]]> Wanted bukshot http://www.suzukicentral.com/forums/32-wanted/105746-wtb-complete-running-z400-motor.html z400 sprockets http://www.suzukicentral.com/forums/37-power-ground/105738-z400-sprockets.html Thu, 16 May 2013 22:38:03 GMT hi everyone, i am new to the forum and had a question... i have a 2004 z400 with stage 1 hot cams 140 main 27 pilot and a lexx mxe slip on with lid... hi everyone, i am new to the forum and had a question... i have a 2004 z400 with stage 1 hot cams 140 main 27 pilot and a lexx mxe slip on with lid off. i am just wondering about sprockets. i have tried 13/40, 13/42, and those are great for trails but i ride a lot of roads so i am back to stock 14/40. i want to go up to 15/40 or 15/38 and was wondering if anyone has tired this gear ratio. sorry for the rambling on and thanks for any help you give me. ]]> Power to the ground htaylor-z400 http://www.suzukicentral.com/forums/37-power-ground/105738-z400-sprockets.html KFX450 Reverse Help http://www.suzukicentral.com/forums/20-tips-n-tricks/105730-kfx450-reverse-help.html Thu, 16 May 2013 21:08:36 GMT I have failed to do this mod and I cannot figure out where my failures happened. I've routed the cable, put the cable on the lever, mounted lever and I have a lot of slack. A lot. Any help is appreciated.
Attached Thumbnails
Click image for larger version Name: reverse cable fail.jpg Views: N/A Size: 83.9 KB ID: 15138  
]]> Phatplat http://www.suzukicentral.com/forums/20-tips-n-tricks/105730-kfx450-reverse-help.html WTB!!!!! Complete head(with valve, spring, cam,...) http://www.suzukicentral.com/forums/32-wanted/105722-wtb-complete-head-valve-spring-cam.html Thu, 16 May 2013 20:32:36 GMT Im looking for a complete head(Valve and stock cam) already assemble(Valve) for my ltz 400 2004... I need price ... im a serious buyer! and I have... Im looking for a complete head(Valve and stock cam) already assemble(Valve) for my ltz 400 2004... I need price ... im a serious buyer! and I have for sale in another thread a frc 39. I can put that in the trade if someone wants to or only cash money... have been satisfy with buying he so I wish I can find it realy fast like the other thing. Thank ]]> Wanted shanon420 http://www.suzukicentral.com/forums/32-wanted/105722-wtb-complete-head-valve-spring-cam.html Fcr 39 for sale! http://www.suzukicentral.com/forums/58-canada/105714-fcr-39-sale.html Thu, 16 May 2013 20:13:15 GMT I got a FCR 39 with the the fuel screw, throttle and cable for sale. I'm asking 200$ plus shipping and Im only shipping to canada and if i cant get it gone will probably ship to us later ]]> Canada shanon420 http://www.suzukicentral.com/forums/58-canada/105714-fcr-39-sale.html Which Cable http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105706-cable.html Thu, 16 May 2013 14:29:59 GMT Hey guys, First off i need help identifying if this is a stock 03' ltz400 thumber. The reason i am asking, is because my bike keeps surprising me with modifications that i didnt know/ am learning of now. It has a yfz450 carb, the fcr 39 mm. I need a throttle cable bad. So first i want to identify if this is a stock thumber, and second, the correct throttle cable to get. I know this has been mentioned before, but again, im not sure if this is the factory thumber or not. And please ignore my friends gang sign hahaha

http://i1335.photobucket.com/albums/...pse3458408.jpg

http://i1335.photobucket.com/albums/...s7cf9fb85.jpeg ]]> Maintenance/Repairs/Tuning rangatang http://www.suzukicentral.com/forums/17-maintenance-repairs-tuning/105706-cable.html <![CDATA[Doug "E" Fresh]]> http://www.suzukicentral.com/forums/33-seller-buyer-dealer-feedback/105698-doug-e-fresh.html Thu, 16 May 2013 06:56:20 GMT seems as everyone already knows, but just for the hell of it. bought some parts off of him paid him that night and he shipped out in the morning... seems as everyone already knows, but just for the hell of it. bought some parts off of him paid him that night and he shipped out in the morning everything was smooth as can be. would definitely do business with again. thanks doug! ]]> Seller/Buyer/Dealer Feedback truckcap22 http://www.suzukicentral.com/forums/33-seller-buyer-dealer-feedback/105698-doug-e-fresh.html