Custom Reverse/Hot-start cable
A few weeks ago, I picked up an MSR clutch perch with hotstart on it and planned on using it for my reverse switch. I proceeded to reroute the reverse cable and used a clutch adjustment barrel on the end of it to make it fit in the hot start connector. It works, but the cable housing is just BARELY long enough, and the cable itself is too long.
It looks like Motion Pro makes custom cables, I was wondering if anyone went this route. If so, do you have the specs on the cable you had made? How well does it work, and do you have any pictures of the cable?
I'm interested in this as well as I'd like to keep my cables all routed along the frame for the most part if possible... that's what I did with the clutch cable, I purchased a longer one along with an "EZ Pull" Clutch gave me plenty of slack to route things nicely out of the way.
|All times are GMT -4. The time now is 12:05 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.