Suzuki Central Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hey I have a z400. Bike wouldn’t Start. Have Spark. I Check my clearance It Was .005 on the Intake Side. And on the Exhaust side it read .007 I know they way off because the manual say. Ex: 0.20-0.30 and IN: 0.10-0.20. I tried to reshim them but all for shim didn’t have any number on them. So I you a micrometer to see the size. I got a read of 3.2mm on the Ex side and on the IN side I got 2.8mm so I Calculated it and got the New shim size do I put them in still no clearance smh please help Do I Need New Valves or Pistol and rings
 

·
Super Moderator
Joined
·
4,934 Posts
Piston and rings is a separate thing.

what size shims did you install? Should have needed a 310 or 305 on the exhaust and a 265 on the intake. If that’s the left side, you still need measurements for the right side.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
I Guess I Add it up Wrong I Put a 350 on both of the EX side and put a 320 in both of the IN side. I will send the picture how I did it
 
1 - 6 of 6 Posts
Top