Suzuki Central Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,095 Posts
Discussion Starter · #1 ·
1. How thick were the washers? Like the one on top (thin) or the stock one (thick) or in between?

2. After doing this with 2 washers, was it harder to get the light gray plastic needle holder back in to seat? I found that it was.. don't want that poppin out.

Thanks!
 

·
Registered
Joined
·
890 Posts
I went to my hardware store and back by the bolts there are drawers that are marked with "Nylon Washers" I bought 2 of the #4 washers at 7 cents apeice. The fit perfect and are the same thickness as the stock ones.They go unde the c-clip and over the metal washer ... Yes it is harder to put the thing back together but be careful ... I broke the fingers that the needle holder fits into ... there is a 3 week back order on the power piston (sounds like a lot of people did the same thing) Good Luck!... MMM 8)
 
1 - 2 of 2 Posts
Top