Suzuki Central Forum banner

brake bleeding help

1209 Views 2 Replies 3 Participants Last post by  spaguru
I am putting on braided lines up front and I am dredding trying to bleed them. Any tips would be great.
1 - 3 of 3 Posts
Go buy a "mity-vac". What you do is put the hose on your bleeder fitting, pump up the pump, and loosen the bleeder. The vacuum sucks brake fluid through the lines and you don't have any bubbles.

The only thing is that you should have a buddy pour brake fluid in the master cylinder while you pump. Otherwise, you end up pumping, then tightening the fitting, then getting up and pouring fluid in, and so on, and so on. Find a buddy.
Yes, a mighty vac is what I used to install my front lines and it is definately the way to go when it comes to bleeding brakes. No mess and works great!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.