Suzuki Central Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
anybody run with this combo. i am and wondered if anybody has found a good combo of carb setups for near sea level. main jet size, needle position, air screw, etc... thanks guys
 

·
Registered
Joined
·
6 Posts
Carb Type: ---> Mikuni BSR36 (stock)
Main Jet: ---> JD Jetting 155
Pilot Jet: ---> JD Jetting 25
Fuel Screw: ---> Kientech Extended 1 1/8 turn out
Needle: ---> JD Jetting Red 4th groove from top (Blue below 45 degrees)
Airbox: ---> UNI Filter--Snorkel removed--Lid on for mud
Pipe: ---> FMF Powerbomb Header w/ Powercore 4 Exhaust
Engine Displacement: ---> Stock
Cams: ---> Stock
CDI: ---> Stock
Altitude: ---> 1000 to 1500 ft
 

·
Premium Member
Joined
·
5,886 Posts
All the combo's and setups are in the jetting database. Check there.
 
1 - 3 of 3 Posts
Top