Suzuki Central Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey everyone. Im new to the forum. Some work was previously done to my quad and now I have a no crank no start when attempting the normal starting process. I had the clutch redone and was fine prior to that project being completed. The quad will pop right off and I can ride all day after a pull start assuming I don't shut it off which rules out most major items in my opinion. Safety switch is bypassed on the clutch perch but still no luck. Was bought brand new and never had issues before a buddy did the clutch for me (he burnt it up so he replaced it) and now having this issue. I do have a new starter button control and but yet to install it

I assume its something safety related within the clutch but im stumped.

Any suggestions?
 

·
Super Moderator
Joined
·
3,590 Posts
Can't think of anything off hand that changing a clutch would affect. I would be chasing wiring and check for voltage to the starter, and checking grounds.
 

·
Registered
Joined
·
1,477 Posts
Check starter relay and fuses and make sure no wires are unplugged and they are bolted down where they are supposed to be. Does it even click when you hit the start button.
 
1 - 3 of 3 Posts
Top