Suzuki Central Forum banner

jets

1K views 2 replies 3 participants last post by  Big Air 
#1 ·
i have a jet kit (dyno-jet) that i used to jet my warrior ,alot of the big jets i didnt use.Will these jets work on the z400?would i need a needle to ?I noticed that the dj part numbers are the same.Also i have the stock 145 main and 155 main jet my dealer recomended for my warrior , (155 too big i couldnt use it) will they work on the z400 ? Just thought if they would work it would save me some dollars.
 
#2 ·
i have a stage II dyno jet with a 150 jet on my Z along with full exhaust...i do need a new filter with a little modifying of my airbox...but the whole setup works great
 
#3 ·
as long as the numbers are the same and it is for a mikuni your are good to go and the 155 with the mods i did was just right
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top