Suzuki Central Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
This winter I pulled my quad all the way down to do some powder coating and it was probably apart for close to 6 months, with that being said I finally got her all put back together and now it doesn’t idle. I did pull the cab apart but did not do any engine mods or mess with any carb jets. I have not connected the throtle position sensor because I read that it doesn’t do much at all. I’ve messed with the carb idle but no luck. Even if I adjust the idle to both extremes. Any help would be appreciated
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
So now I’m starting to think my idle adjustment isn’t working. Maybe ?? It makes no difference if I back the screw most of the way out or if I screw it all the way in. What could be causing this , could j have the throttle linkage put together wrong or could it be one of my jets are clogged . Please help
 
1 - 2 of 2 Posts
Top