Suzuki Central Forum banner

1 - 20 of 57 Posts

·
Registered
Joined
·
1,664 Posts
Discussion Starter #1 (Edited)
All parts from a 2004 LTZ

All prices are WITHOUT shipping


Engine.

95 mm Sleved cylinder with Cp 12.5:1 piston -250
DLC Titanium wrist pin (never used) -SOLD
Web 539+6 / 69 grind cams (.400 / .410 lift!!!) -300
Head ported by me with Ferra valves and Kibblewhite springs and titanium retainers -350


Chassis.

Roll design +3 LT a-arms -SOLD
Burguard + 1.75 swing arm WITH caliper bracket and carrier (very good bearings) 500
Lonestar +4/+2 adjustable axle with Lonestar rotor mount - 200
Hiper CF rims WITHOUT tires. Dual beadlock rear / single beadlock Front. rears will need new hubs. splines have stripped out of both. -400
Galfer wave rotors front and rear -100
Stainless braided brake lines front +3 rear +4 -SOLD
AC Racing nerf bars married to IMS ROLL heel guards -200
Black ASV brake and clutch levers -SOLD
Lonestar steering stem with bar clamp -125
AC Racing front bumper SOLD
AC Racing frame guard -15
OMF radiator scoops SOLD


All i can really remember, ask if you see something you like. 3 hours from home now. going to get back to doing beach things.
when posting here please FOLLOW FOURM RULES.







pick away vultures:lol
 

·
Registered
Joined
·
106 Posts
interested in the asv levers and what length is the stem and what size bars can be used
7/8 or 1 1/8 .
thanks
 

·
Registered
Joined
·
973 Posts
Did you sell the bottom end?

And would you sell just the exhaust cam?
 

·
Registered
Joined
·
200 Posts
Ill buy the scoops. Gimme ur paypal addy
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #7

·
Registered
Joined
·
348 Posts
What condition is the cylinder in? How many hours are on it?
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #9
Did you sell the bottom end?

And would you sell just the exhaust cam?
-I have 2 bottom ends, one with a broken rod and the one from this bulid that doesnt have a crank. might be better off finding another. and Cams are sold as a set.


interested in the asv levers and what length is the stem and what size bars can be used
7/8 or 1 1/8 .
thanks

-The levers are spoken for as of now and I belive the stem is a +1 with 7/8 bars but I can get a better idea when I get home.



Ill buy the scoops. Gimme ur paypal addy

- Grocery store has dibbs on the scoops. PM shortly.


Interested in a-arms shipped to 46120. PM me a total please

-The A-arms will come with the tie rods, just FYI. PM shortly


What condition is the cylinder in? How many hours are on it?

Its in pretty good condition, I wouldnt hesitate to run it again. and 20-30 hrs. If you get the DLC wrist pin and piston/cylinder combo ill do all for 350 shipped.
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #10
PigglyWiggly's money + My paypal = SOLD OMF SCOOPS
 

·
Registered
Joined
·
348 Posts
Ok let me do some thinking. Im debating about swapping to an ltr or big bore my z for next mx season. Last question, what type of power did those cams make in the low mid and high ranges?? Ive never heard of that grind combo?
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #12
Thoes are custom ground cams. They were for my stock valve 472 Big bore stroker. With a ported head, STD valves intake, exhaust..... they pulled like crazy. I have helmet cam videos showing me spinning out in third gear and then launching off again in third, with 18" kenda Klaws. they are huge cams, definitely only for 470+cc's.
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #13
All requests replied to and PM's sent. If I forgot any please let me know. If I didnt, Then im awesome!:lol
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #14
Front bumper SOLD

Front shocks SOLD

A-arms and tie rods SOLD


If you have any questions on anything just PM me, I wont bite, I just want your money:lol
 

·
Registered
Joined
·
91 Posts
You selling the carb?
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #16
You selling the carb?
Ya, but its claimed as of now. If anything changes your next in line.

If you see something you like and its not listed just ask. :D
 

·
:::Formerly Cheapracer:::
Joined
·
740 Posts
Pm sent on the wrist pin!
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #18
Titanium wrist pin SOLD AMERICAN!!
 
1 - 20 of 57 Posts
Top