I have a partially parted one. Its only missing 3 things.
Here is a link to what is missing.... The thing you will need to get is #46.
And what #46 screws into has the brass guide that the throttle cable goes through. It isn't replacable. So all you would have to do is find someone that is parting a carb out and get #46 and what it screws into. ( that comes off with 2 allen head screws.) And the idle adjustment knob is missing but the cable is there. Not sure if you can just unscrew the knob off of another one or not. If you could get these parts used I would say it would be around $15-$20 shipped. Other than those 3 things carb is all there. Majority of the POS phillip screws were replaced with good allen head screws also. http://www.bikebandit.com/2003-suzuki-ltz400/o/m6504#sch506546
A forum community dedicated to all Suzuki ATV owners and enthusiasts. Come join the discussion about performance, modifications, repairs, troubleshooting, maintenance, and more! Open to all models including the ltz 400, raptor 660, eiger 400, ltz 250, and raptor 350.